wadax logo

The TIDAL Assoluta Monoblock

The TIDAL Assoluta Monoblock

The TIDAL statement power amplifier in monoblock fashion. The Assoluta is the finest we offer to amplify the most delicate music signals to ultimate power. The Monoblock offers all the loudspeaker’s grip and control without adding color to the signal. 

The result we have accomplished is beyond the trial to get an idea out of the provided specifications, data, and used technologies. Silence. Finesse. Endless control. Music in its true beauty.

SPECIFICATIONS

  • Concept: true separated linear voltage power regulator mono power amplifier
  • 3 specially designed high power and low noise magnet-field compensated transformers with perfectly equal temperature compensation, mechanically decoupled and double shielded with very high cable cross-
  • Section, total transformer power 2.400 VA
  • 3 pure silver hollow conductor EMI-Filters in a resonant dampened compound enclosure, lowest interference power supply for the main transformers
  • High speed and low noise linear-voltage-regulator as the main supply for the power amplifier
  • 58 high-grade and low-impedance capacitors with a total capacity of 330.000µF
  • In-house made 4-times multilayer PCB (printed circuit board) with 105 µm copper per layer
  • Ultra-wide copper strip line PCB design for speaker output, main ground, and power supply
  • High current 200A press-fit connectors for power supply and speaker outputs
  • Pure silver binding post connectors in CWT (technology) for the lowest resistance and most reliable contact
  • 16 high-speed and low-distortion bipolar audio transistors for the power amp
  • Hand-selected transistors, measured and matched with a precision better than 1%
  • DC-coupled input circuit, without coupling capacitors or relay in the signal path from the input to the output
  • No relay in the signal way from XLR input to speaker output
  • Ultralow impedance capacitors directly at the transistors for the shortest connection
  • TIDAL proprietary APM system (amplifier protection management) is completely outside of the signal path
  • TIDAL APM System is an isolated and completely autarkic system to manage and control the power amps safety: output current in relation to output voltage, short circuit current, DC- -offset, under-voltage, and excess voltage
  • Sequential daisy-chain remote power on/off up for 4 amplifier
  • Weight without packaging, per piece 85 Kg / 188 lbs.
  • Length, width, height: 60cm x 44cm x 32,5cm / 23,6” x 17,3” x 12,3”
  • Power at 8 / 4 / 2 Ohm (rated) 380 W / 750 W / > 1.200 W
  • Power at 8 / 4 / 2 Ohm (Impulse) 700 W / 1.300 W / > 1.900 W
  • Linear-power-supply 1 x 2.000 VA
  • Power consumption: < 1 W in stand-by mode, 250 watts in low volume mode, 2.400 watts in full power mode
  • Amplification bandwidth: wider than the highest resolution sources
  • Damping factor: ideal damping factor for lifelike music reproduction, perfectly even over the whole spectrum
  • Distortions 25W/4Ohm below 0,01%
  • Distortions -1dB below max. power below 0,08%

PRODUCT INTEREST

PRODUCT INTEREST