kuzma logo

Stabi R

BROCHURE
REVIEWS
kuzma logo

Stabi R

BROCHURE
REVIEWS

Stabi R is a very compact turntable made from a solid block of aluminium with an internal (built in) electronic power supply. Drive is provided through a DC motor and a proprietary, non flexible drive belt.

The main platter is a constrained sandwich design consisting of three layers ( aluminium – acrylic – aluminium) in order to minimise vibration and maximise the damping effect of the platter itself and that of the LP. The ruby ball minimises friction and noise within the thrust bearing and is supported on a special low noise compound material.
One of the crucial design features of the new Stabi R is an unsurpassed degree of versatility and flexibility with regard to multiple tonearm installations. It is possible to use up to 4 (four!) tonearms around the main platter.Further, a variety of colours and a wood finish are available as options.

STABI R various UK- 2020
STABI R various UK- 2020

Stabi R is a very compact turntable made from a solid block of aluminium with an internal (built in) electronic power supply. Drive is provided through a DC motor and a proprietary, non flexible drive belt.

The main platter is a constrained sandwich design consisting of three layers ( aluminium – acrylic - aluminium) in order to minimise vibration and maximise the damping effect of the platter itself and that of the LP. The ruby ball minimises friction and noise within the thrust bearing and is supported on a special low noise compound material.
One of the crucial design features of the new Stabi R is an unsurpassed degree of versatility and flexibility with regard to multiple tonearm installations. It is possible to use up to 4 (four!) tonearms around the main platter.Further, a variety of colours and a wood finish are available as options.

Mass: 36 kg
Platter mass: 8 kg
Platter material: aluminium & acrylic
Bearing type: inverted (ruby ball)
Shaft diameter: 16 mm
Chassis/levelling: aluminium / yes
Turntable levelling: yes (4 adjustable feet-thread M12x1)
Drive: Single DC motor
Belt: proprietary non flexible belt
Internal power supply: yes (electronic)
Speeds: 33, 45, (fine speed adjustment)
Armboard: yes
VTA adjustment: no
No. of tonearms: 1 (+ up to 3 optional )
Suspension: no
Dimensions: 480 x 380 x 150 mm
Base only: 320 x 380 x 150 mm ( 30 kg)
RD with two wings: 600 x 380 x 150 mm ( 38 kg)
Wood version: 500 x 460 x 190 mm ( 39 kg)
Finish: black or silver ( RAL 9006 )
Record Clamp: optional ( there is a mistake on brochure)
Platter Mat: yes
Mains supply: 115/230/50-60 Hz
Dust Cover: no
Accessories supplied: bearing oil, Allen keys
Options: clamp, various pre-cut arm boards, RAL finishes,left sidearm wing, arm holder ( M10), arm holder multi( M10), arm balcony , side panel, wooden frame...