• What a table! Do not let the unique design fool you. In its simplest form, the Stabi S is a HIFI jewel and has extreme value for the dollar, especially when used with Kuzma tonearms and cartridges. It is constructed with very rigid brass tubing that when joined together forms the shape of a “T”, and comes in natural brass or a black powder coat. This high-mass brass tubing is perfect for a rigid connection to the platter, bearing assembly, and tonearm support. The belt drive motor sits outside the tube and an optional dongle connects it to the controller to set and adjust 33 and 45 RPM speeds. Albums will rest on a solid aluminum platter.  Additional options allow the cross brass tube to support a second arm, which is how we like to set it up. Spindle-to-pivot adjustment for the tonearm is easily adjustable using an eccentric collar that also allows VTA adjustment with a set screw.   Further performance is gained using the Kuzma Platis platform.
  • Stabi R is a compact turntable made from a solid aluminum block with an internal (built-in) electronic power supply. The drive is provided through a DC motor and a proprietary, non-flexible drive belt. The main platter is a constrained sandwich design consisting of three layers (aluminum – acrylic – aluminum) to minimize vibration and maximize the damping effect of the platter and the LP. The ruby ball minimizes friction and noise within the thrust bearing and is supported on a unique low-noise compound material. One of the crucial design features of the new Stabi R is an unsurpassed degree of versatility and flexibility about multiple tonearm installations. Using up to 4 (four!) tonearms around the main platter is possible. Further, various colors and a wood finish are available as options.
  • This is constructed from two plates, each plate being made from a sandwich construction of two 10 mm aluminum plates, separated by an acrylic plate clamped together with pre-stressed, non-magnetic, stainless steel screws. The turntable chassis (top plate) is suspended by large springs submerged in silicone oil, with a low resonance of 2.2 Hz, dampening the springs' movements. Three aluminum and stainless steel spikes support the main base (bottom plate). Four knobs quickly level the top plate. The silicone suspension reservoirs are automatically sealed when this plate is lifted (for transport). Two motors in a diamond drive power the sub-platter, which has an inverted bearing with a ruby ball. The ball and sliding ring have their oil bath for lubrication and damping any vibration within the bearing. The platter is also of a clamped sandwich construction to combine the strength of aluminum (rigidity) and acrylic's damping properties, producing an exceptionally stable and no resonant support for records. The mat and special clamp are made in much the same way as the platter and further serve to control all vibrations. The arm board also employs the sandwich construction design.  
  • This modern turntable is designed in a classic style, is low profile, and includes a vibration-free massive acrylic dust cover on spring hinges. The turntable is assembled from various solid aluminum parts, making the construction rigid and absorbing vibration. On the outer sides of the main structure are solid aluminum plates, which give the turntable mass and further increase structural rigidity and damping. The covered spikes within the legs allow horizontal leveling of the whole turntable. The top aluminum plate under the platter has an elastically under-hung main frame and motor system below, insulated from the outer central turntable’s structure via four big elastic dampers. This allows for fine horizontal leveling of the platter and tonearm. The platter is constructed from two pieces of 30mm thick aluminum with an acrylic damping plate sandwiched between, making a very inert support for records. The bearing has an inverted shaft with a ruby ball, which gives precise, low-noise rotation to a supporting sub-platter. The main frame, carrying the main bearing and massive aluminum arm board, is bolted together from solid aluminum blocks, forming a unique damped rigid support. The motor system:  The DC motor is specially mounted inside a brass cup and aluminum plate. This motor assembly is encapsulated and suspended inside a massive brass motor housing.  Thus, the main frame is doubly insulated from the motor system yet still maintains rigidity, allowing maximum torque momentum to be transmitted via the stiff plastic belt to the sub-platter. This gives the platter a high torque drive with the positive properties of belt and idler drives while minimizing the negative ones. The external power supply controls the  DC motor with precise frequency and has excellent speed adjustments. The control panel on the front plate of the turntable has start/stop and speed change functions. The full speed of platter on 33 rpm is reached in just 2 seconds - in one full rotation of the platter. There is also a remote control start/stop function. STABI M  PLUG AND PLAY: The Stabi M can be ordered and fitted with a 4Point tonearm and a CAR cartridge with no need for adjustment.

Title

Go to Top