The Stromtank makes your dreams come true…
Audiophiles are always looking for clean, undisturbed grid power to achieve the next level of music quality with their hifi systems.
One of the most important facts to hear the excellent quality of your audio-components is the purity and stability of the grid signal. Daily routine equipment like PCs or microwave influence the grid. Everyone is connected to the same dirty grid polluted with DC voltage, high level and frequencies. All interferences manipulate audio-quality and even the best power conditioners are not able to eliminate the disturbances.
Audiophiles were waiting until deep in the night for a less-disturbed AC-grid to get good sound. Don’t wait until midnight to get the best sound!
The Stromtank makes your dreams come true...
Audiophiles are always looking for clean, undisturbed grid power to achieve the next level of music quality with their hifi systems.
One of the most important facts to hear the excellent quality of your audio-components is the purity and stability of the grid signal. Daily routine equipment like PCs or microwave influence the grid. Everyone is connected to the same dirty grid polluted with DC voltage, high level and frequencies. All interferences manipulate audio-quality and even the best power conditioners are not able to eliminate the disturbances.
Audiophiles were waiting until deep in the night for a less-disturbed AC-grid to get good sound. Don’t wait until midnight to get the best sound!
Input AC parameters ON-grid
Input voltage - factory set: 100 - 120 Vac / 230 - 240 Vac
Input frequency range - factory set: 45 to 65 Hz
Input current adjusted: 10 Aac
transfer time: < 15 ms, on grid to off grid
Output AC parameter OFF-grid
Output voltage - factory setting: 100-130Vac / 200-245Vac (pure sine wave)
Output frequency: 50 Hz / 60 Hz +/- 0.05% (crystal controlled)
Harmonic distortion: <2%
Continues power @ 25°C: 950 VA
Power 30min. @ 25°C: 1.500 VA
Peak Power 3 sec. @ 25°C: 3.700 VA
Ø battery operating time/average load 400VA (Cos φ=1): 5 hours
Maximum load: up to short circuit
Maximum asymmetric load: up to P cont.
Load detection (Stand by): 2.5 W
Cos φ: 0.1 – 1
Maximum efficiency: 93% (dc/ac conversion mode)
Consumption stand-by / on: 1.5 W / 8 W
Overload + short-circuit protection: automatic disconnecting with 3 restart attempts
Overheat protection: warning before shut-down with automatic restart
Operating temperature: 10 °C - 45°C
Relative Humidity: 0 - 85% non-condensing
Acoustic level: < 29 dB
Battery power unit
Battery type: LFP - Lithium Iron Phosphate (LiFePO4)
Nominal battery voltage: 24 Vdc
Nominal capacity: 100 Ah
Charge current - factory setting: 10 Adc
Working temperature: 0 to 45°C, 32 to 113°F
BMS - Battery Management System: active balancing
Terminal Area
AC output receptacles: 3x Hubbell duplex, Hospital spec. Grade or 3x Furutech High perfor. Schuko sockets
AC output fuse: thermal – magnetic circuit breaker
AC input connection: ICE 320 - C14 (fuse 16/10AT)
Interface: 3 service ports:
Power switch: on/off (“on” = green LED)
Safety key switch for shipping: key switch “Release/Lock” all functions
Additional Features
Finish standard: black anodized *
Weight: 80 kg / 253 Ibs
Dimension (w x h x d): 48 x 54 x 59 cm | 19" x 23" x 23"
Remote control: optional
* metallic-black and meteorit front-finish available at additional cost.
Custom finish upon request.
