4Point 9 is shorter version of 4Point tonearm. Due its 9 inch lenght and lack of VTA tower makes this tonearm lighter and smaller thus capable of fitting on most suspended turntables.
All 4P9 has sapphire/ruby cup bearings fitted since its introduction and all 4P11 and 4P14 since July 1st 2018.
4Point 9 is shorter version of 4Point tonearm. Due its 9 inch lenght and lack of VTA tower makes this tonearm lighter and smaller thus capable of fitting on most suspended turntables.
All 4P9 has sapphire/ruby cup bearings fitted since its introduction and all 4P11 and 4P14 since July 1st 2018.
Effective length: 229 mm
Arm mount distance: 212 mm
Spindle to pivot distance: 212 mm
Bearing type: 4 points (sapphire-transparent / ruby-red cups / steel pivots-see modification note for 4P11 or 4P14)
Effective mass: 13 g
Total mass: 920 g
Offset angle: 23 deg
VTA adjustment: Yes
Azimuth: Worm drive
Tube: Conical
Bias: Yes
Max cartridge mass: 35 g
Damping: No
Detachable headshell: Yes ( three dots)
Arm mount Kuzma
Standard wiring: Silver
Accessories: Yes
Optional wiring: Yes
Optional connectors: XLR,5 Pin
